How to insulate container house in summer?

How to avoid the impact of high temperature on container houses? The key is to have a good insulation effect. General containers will take the following measures for insulation:

1. The outer layer of the container house is made of high-strength colored steel plate, and the inner layer is made of light-weight insulation material polystyrene foam. The colored steel plate is pressed by an automatic continuous forming machine and then bonded with high-strength and adhesive. A new and efficient building material. It has excellent properties such as light weight, high mechanical strength, heat insulation, sound insulation, corrosion resistance, water vapor penetration resistance and weather resistance.



2. I believe that many people have used the roof of the single-layer color steel plate house. However, in summer, most people report that it is relatively hot. Here is a relatively simple way to lower the temperature. First, the T-shaped keel is used as the main keel in the light steel keel frame to lift the frame of the top keel and the effect of the decorative panel. The L-shaped keel is the side keel, which is mainly used to connect the ceiling fan bones to the interior, southeast, northwest walls or columns. The joint effect of the wall is also partially decorated with the veneer. After the boom is fixed on the floor with a blast screw, the T-shaped main keel is connected with the T-shaped keel suspension. If the ceiling has additional loads or a large surface Or the size of the surface of the object requires a U-shaped load-bearing keel, that is, after the boom is installed, first use the U-shaped load-bearing keel (main keel) hanger to connect the U-shaped main keel and the boom, and then use the T-shaped keel The pendant connects the T-shaped longitudinal keel with the U-shaped main keel. In this way, the temperature can be lowered more effectively in summer.

3. Increase the thickness of the foam: In practice, the higher the density and the thicker the foam, the stronger the insulation effect.

4. Good thermal insulation performance of rock wool is the basic characteristic of rock wool and slag wool products. Their thermal conductivity is usually between 0.03 and 0.047W/(moK) at room temperature (about 25℃).